HP 9350i 10x4x32 IDE, slave on ide0
As of Linux 2.6 you don't seem to need to use SCSI emulation anymore as long as you tell
cdrecord
what to do using
dev=ATAPI
on the command line.
Also make sure that the
ide_generic
module is loaded.
tobyc@dickless:~$ cdrecord -scanbus dev=ATAPI
Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to .
The original author should not be bothered with problems of this version.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'HP ' 'CD-Writer+ 9300 ' '1.0b' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
tobyc@dickless:~$
You use
mkisofs to make the iso 9660 filesystem image and then
cdrecord to write it to the disk (both packages can be dselected). For example, this will build a filesystem image called /mnt/test/cd_image with /home/cvs as /cvs, /home/www as /www, and /home/postgres as /postgres:
# cd /home
# mkisofs -r -o /mnt/test/cd_image cvs/=cvs www/=www postgres/=postgres
You can mount the image via loopback to see if it's what you want:
# mount -t iso9660 -o ro,loop=/dev/loop0 /mnt/test/cd_image /mnt/cdrom
Then you can burn a CD with the image (note that the
blank=fast
flag tells cdrecord to erase the media first - this only works with cd/rw media, also note that the
"0,0,0"
matches what
cdrecord -scanbus
output above):
# cdrecord -v speed=4 dev=ATAPI:0,0,0 blank=fast -data /mnt/test/cd_image
Alternatively you can pipe the output of mkisofs into cdrecord. This doesn't chew up a lot of temporary disk storage, but you don't get to look at the results before you burn them. This is probably OK if you're using cd/rw media or if you're running the same script over and over (e.g. backups):
# cd /home
# mkisofs -r cvs/=cvs www/=www postgres/=postgres | cdrecord -v speed=4 dev=ATAPI:0,0,0 blank=fast -data -
The HOWTO talks about having to do a pro-forma
mkisofs
run to find out how big the image will be but it appears that the HP 9350i doesn't require this.
Audio CD's
Of the tools that you can "dselect" only cdrtoaster appears to be able to take mp3's as input and burn them onto an audio disc.
I tried two KDE programs - arson and k3d and neither was capable of actually burning a disc.
On the other hand, burning is pretty easy if you've got the wav files handy:
cdrecord -v -pad speed=8 dev=ATAPI:0,0,0 -dao -audio -swab *.wav